Newfoundland & Labrador, #2, 16 Unit container, Unitized

    Persuant to the regulations under the Newfoundland and Labrador Occupational Health & Safety Act, as amended
    No. 2 kit for workplaces with 2-14 workers (at any one time)
    For the most current regulations, refer to Occupational Health and Safety Department
    Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    Container has a carrying handle and hanging apparatus   
    With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included: First Aid Station sign and Report All Accidents sign
Additional items may be required where there are more than 15 workers or where required by an officer: stretcher, 3 blankets, 3 splints

Newfoundland & Labrador, #1, 10 Unit container, Unitized

    Persuant to the regulations under the Newfoundland and Labrador Occupational Health & Safety Act, as amended
    No. 1 kit for workplaces with 1 worker (at any one time)
    For the most current regulations, refer to Occupational Health and Safety Department
    Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    Container has a carrying handle and hanging apparatus   
    With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included: First Aid Station sign and Report All Accidents sign
Additional items may be required where there are more than 15 workers or where required by an officer: stretcher, 3 blankets, 3 splints

Prince Edward Island, No. 3, 24 Unit Container, Unitized

No. 3 kit for workplaces with 20 or more workers (at any one time)
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Prince Edward Island's Workers’ Compensation Board
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included: First Aid Station sign, spinal backboard

Prince Edward Island, No. 2, 16 Unit Container, Unitized

No. 2 kit for workplaces with 2-19 workers (at any one time)
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Prince Edward Island's Workers’ Compensation Board
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included: First Aid Station sign, spinal backboard

Prince Edward Island, No. 1, 10 Unit Container, Unitized

No. 1 kit for workplaces with 1 worker (at any one time)
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Prince Edward Island's Workers’ Compensation Board
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Item required but not included: First Aid Station sign

"Level 3" British Columbia Regulation First Aid Kit, #2 Container, Unitized

For Level 3 workplaces in the province of British columbia
Please note: The contents of this kit are identical to the Level 2 kit. Level 3 requires 2 or more kits.
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Workers' Compensation Board of BC
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included:
CPR pocket mask, 3 blankets, portable oxygen therapy unit, manually operated self-inflating bag-valve-mask, oropharyngeal (oral) airway kit

"Level 2" British Columbia Regulation First Aid Kit, #2 Container, Unitized

For Level 2 workplaces in the province of British columbia
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Workers' Compensation Board of BC
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included:
CPR pocket mask, 3 blankets, portable oxygen therapy unit, manually operated self-inflating bag-valve-mask, oropharyngeal (oral) airway kit

"Level 1" British Columbia Regulation First Aid Kit, #2 Container, Unitized

For Level 1 workplaces in the province of British columbia
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Workers' Compensation Board of BC
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
Item required but not included: 3 blankets
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Note: Image displayed is that of a level 2 kit !

"Basic" British Columbia Regulation First Aid Kit, 36 Unit Container, Unitized

Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Workers' Compensation Board of BC
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Face Shield/Lung Bags, Infant (CPR Prompt)

    For use with Infant Manikin (item 17116 or 17117)
    Includes: 100/package

Federal (Type D) First Aid Kit, Unitized

For Type D workplaces with 1-3 workers (at any one time)

Content List
Refer to Product Description tab (below)

Available in alternative containers
  - 10 unit plastic
  - 10 unit rounded metal with rubber gasket

PLEASE SELECT YOUR CHOICE OF CONTAINER: . . .

Federal (Type C) First Aid Kit, Unitized

For Type C workplaces with 6-19 workers (at any one time)

Content List
Refer to Product Description tab (below)

Available in alternative containers
  - #2 plastic
  - #2 metal cabinet
PLEASE SELECT YOUR CHOICE OF CONTAINER: . . .

Federal (Type A) First Aid Kit, Unitized

For Type A workplaces with 2-5 workers (at any one time)

Content List
Refer to Product Description tab (below)

Available in alternative containers
  - 10 unit plastic
  - 10 unit rounded metal with rubber gasket

PLEASE SELECT YOUR CHOICE OF CONTAINER: . . .

Federal (Type B) First Aid Kit, Unitized

For Type B workplaces with 6-19 workers (at any one time)

Content List
Refer to Product Description tab (below)

Available in alternative containers
  - 16 unit plastic
  - 24 unit plastic
  - 24 unit rounded metal with rubber gasket

PLEASE SELECT YOUR CHOICE OF CONTAINER: . . .

1" (2.5 cm) Conforming Bandage/Stretch Gauze (Non Sterile) 4.1 yd. (3.7 m) roll, package of 1 dozen (12)

Soft, lightweight 1-ply stretch rayon/nylon blend conforming bandage provides low compression and non-slip support
Ideal for securing and retaining general dressings
Bandages conform and hold securely to any body contour while allowing patient movement and soft tissue swelling
Suitable for bandaging irregular extremities and body surfaces, including the head, joints and stumps
Air-permeable and absorbent; promotes wound aeration, evaporation of perspiration and exudate (discharge) for faster healing
Will not stick to skin or clothing
Rolls are 3.7 m (4.1 yds) in length when stretched

1" (2.5 cm) Conforming Bandage/Stretch Gauze (Non Sterile) 4.1 yd. (3.7 m) roll

Soft, lightweight 1-ply stretch rayon/nylon blend conforming bandage provides low compression and non-slip support
Ideal for securing and retaining general dressings
Bandages conform and hold securely to any body contour while allowing patient movement and soft tissue swelling
Suitable for bandaging irregular extremities and body surfaces, including the head, joints and stumps
Air-permeable and absorbent; promotes wound aeration, evaporation of perspiration and exudate (discharge) for faster healing
Will not stick to skin or clothing
Rolls are 3.7 m (4.1 yds) in length when stretched

Saskatchewan Regulation First Aid Kit (40+ Workers)
    * For workplaces with 1-9 workers (at any one time)
    * Items required but not included in all kits in distant and isolated areas (more than 30 minutes to a medical facility or where normal mode of transport is aircraft): blankets, stretcher, splints. For high hazard work situations and workplaces requiring Class A or Class B attendants, consult www.labour.gov.sk.ca for additional requirements
    * Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
    * For the most current regulations, refer to Saskatchewan's Occupational Health & Safety Department
    * Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    * With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
OPTIONS:
    * Bulk packed
    * Unitized packaging also available. Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit (shown in picture)
    * Plastic or Metal container

Content List
Refer to Product Description tab (below)

PLEASE SELECT STYLE: . . .

Saskatchewan Regulation First Aid Kit (10-40 Workers)
    * For workplaces with 1-9 workers (at any one time)
    * Items required but not included in all kits in distant and isolated areas (more than 30 minutes to a medical facility or where normal mode of transport is aircraft): blankets, stretcher, splints. For high hazard work situations and workplaces requiring Class A or Class B attendants, consult www.labour.gov.sk.ca for additional requirements
    * Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
    * For the most current regulations, refer to Saskatchewan's Occupational Health & Safety Department
    * Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    * With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
OPTIONS:
    * Bulk packed
    * Unitized packaging also available. Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit (shown in picture)
    * Plastic or Metal container

Content List
Refer to Product Description tab (below)

PLEASE SELECT STYLE: . . .

Saskatchewan Regulation First Aid Kit (1-9 Workers)
    * For workplaces with 1-9 workers (at any one time)
    * Items required but not included in all kits in distant and isolated areas (more than 30 minutes to a medical facility or where normal mode of transport is aircraft): blankets, stretcher, splints. For high hazard work situations and workplaces requiring Class A or Class B attendants, consult www.labour.gov.sk.ca for additional requirements
    * Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
    * For the most current regulations, refer to Saskatchewan's Occupational Health & Safety Department
    * Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    * With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
OPTIONS:
    * Bulk packed
    * Unitized packaging also available. Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit (shown in picture)
    * Plastic or Metal container

Content List
Refer to Product Description tab (below)

PLEASE SELECT STYLE: . . .

Alberta Regulation First Aid Kit - No. 3 Unitized - Rubber Gasket

* Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
* Items required but not included: (see Related Products)
        accident record book (item #74 or 75),
        First Aid Station sign (item 93-5000) and
        Report All Accidents sign (item 93-5002)
* For the most current regulations, refer to Alberta's Workplace Health & Safety Department
* Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
* Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
* With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Qty Product Name
Refer to Product Description tab (below)

Alberta Regulation First Aid Kit - No. 2 Unitized - 36 Unit with Rubber Gasket

* Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
* Items required but not included: (see Related Products)
        accident record book (item #74 or 75),
        First Aid Station sign (item 93-5000) and
        Report All Accidents sign (item 93-5002)
* For the most current regulations, refer to Alberta's Workplace Health & Safety Department
* Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
* Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
* With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Qty Product Name
Refer to Product Description tab (below)

Quebec Regulation First Aid Kit
Section 5 - Unitized - 10 Unit
   * Pursuant to Section 5; for vehicles used by, and for, the transport of workers (other than those outlined in Section 4)
    * Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
    * For the most current regulations, refer to Quebec's CSST
    * Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    * Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    * With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Content List
Refer to Product Description tab (below)

New Brunswick Basic First Aid Kit - Unitized - 36 Unit Plastic container
Also available:
   - #2 Plastic container, unitized items
   - 36 Unit Metal cabinet with gasket, unitized items
   - #2 Metal cabinet with gasket, unitized items
   - #3 Metal cabinet with gasket, unitized items
   - Nylon Soft Tote, compartmentalized  (bulk items)
   - Refill (unitized contents only)

Basic First Aid Kit
    * Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
    * For the most current regulations, refer to Workplace Health & Safety and Compensation Commission of New Brunswick
    * Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    * Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    * With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Content List
Refer to Product Description tab (below)

PLEASE SELECT KIT STYLE: . . .

New Brunswick Personal First Aid Kit - Unitized - 10 Unit Plastic container
Also available:
   - 10 Unit Metal cabinet with gasket, unitized items
   - Nylon Soft pack (small belt), compartmentalized  (bulk items)
   - Refill (unitized contents only)

Personal First Aid Kit - 1 worker (at any one time)
    * Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
    * For the most current regulations, refer to Workplace Health & Safety and Compensation Commission of New Brunswick
    * Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    * Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    * With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Content List
Refer to Product Description tab (below)

PLEASE SELECT KIT STYLE: . . .