Prosphyg^™ 760 -  Pocket Aneroid Sphyg

THE BLAST® BANDAGE

• Traumatic Amputations;
• Mangled Limbs;
• Large Area Wounds;
• Eviscerations;
• Shrapnel Wounds;
• Burns.

     Features:

• 20" x 20" Sterile non-stick surface pad area;
• 19" 19" occlusive layer included in pocket;
• "Control Strips" sewn onto elastic wrap in intervals;
• Latex free;

CPR Pocket Mask in a hard plastic case (Case: 50 unts)
Viral and bacterial filter.
Reusable medical grade, clear thermoplastic mask with head straps for effective nose and mouth ventilation.
Soft inflated cuff to aid facial fit and comfort.
One way valves and directional diaphragms prevent back-flow.
Standard 15/22 mm input connectors permit connection to manual or mechanical resuscitators or bag-valve-masks.

Note:  Also sold indivdually.

Introducing the next generation of Cardiology stethoscopes -- the new Littmann Cardiology IV

Outstanding acoustics with better audibility of high-frequency sounds (adult side, firm pressure).
Tunable diaphragm: Hear high or low frequency sounds by slightly adjusting pressure on the chestpiece.
Dual-lumen tubing: Two sound paths in one tube eliminates the rubbing noise of traditional double tubes.
Next-generation tubing lasts longer and resists stains. Not made with natural rubber latex or phthalate plasticizers.
Headset is easily adjusted for individual fit and comfort. Angled eartubes align with ear canals.
Seven-year warranty provides greater peace of mind

ENGRAVING:    Limited Time Offer - Free "Head" Engraving !!
Personalize your stethoscope by engraving the tubing currently at an introductory price of only $0.99 or the 'Head' for $4.99 FREE.
A maximum of 24 characters can be engraved along the straight section of tubing between the point of bifurcation and the cross tubing support piece. Choose between engraving on the outer "front" aspect of the tube or a more discrete, private engraving on the inner "rear" aspect.
Engraving on the head is located on the outer exposed stainless steel aspect of the larger head.
Please note that a personalized stethoscope cannot be returned or exchanged.
Prior to engraving, your purchase must be paid in full. COD and cheque orders cannot be engraved.
The First Aid Zone strives to ship all in-stock stethoscope orders within 24-48 hours after receiving an order. Engraving may slightly delay shipment. Please contact us or add a comment with your order if you are concerned with a delivery deadline.

PLEASE SELECT THE COLOUR OF YOUR CHOICE:...

Littmann® Classic III™ 3M™ Student Special Package !!

Includes:
- 1 Littmann Classic III Stethoscope (Six year warranty) REGULAR $141.99
- 1 Sphygmomanometer, Dual tube (Blood Pressure Unit) REGULAR $39.99
- 1 Reusable Penlight with Pupil Gauge (2 AAA batteries included) REGULAR $8.00
- 1 Stainless Steel Lister Bandage Scissors (5.5") REGULAR $5.50
- 1 Free Engraving on Stethoscope (Tube engraving, back of the tube, maximum 20 characters) REGULAR $9.99
- Access to Online Learning Institute App   $59.99 VALUE

Northwest Territories & Nunavut, No. 3, #6 Metal Cabinet, Unitized

Regulation first aid kits meet regulations required by the Government of Northwest Territories & Nunavut; regulations change on a continuing basis
For the most current regulations, refer to Government of the Northwest Territories
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
Container has a carrying handle and hanging apparatus
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Northwest Territories & Nunavut, No. 2, #2 container, Unitized

Regulation first aid kits meet regulations required by the Government of Northwest Territories & Nunavut; regulations change on a continuing basis
For the most current regulations, refer to Government of the Northwest Territories
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
Container has a carrying handle and hanging apparatus
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Northwest Territories & Nunavut, No. 1, 24 Unit, Unitized

Regulation first aid kits meet regulations required by the Government of Northwest Territories & Nunavut; regulations change on a continuing basis
For the most current regulations, refer to Government of the Northwest Territories
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
Container has a carrying handle and hanging apparatus
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Yukon, Level 3, #2 Unit Container, Unitized

    Regulation first aid kits meet regulations required by the Government of Yukon; regulations change on a continuing basis
    For the most current regulations, refer to Yukon Workers' Compensation Health and Safety Board
    Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    Container has a carrying handle and hanging apparatus
    With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Yukon, Level 2, 36 Unit Container, Unitized

    Regulation first aid kits meet regulations required by the Government of Yukon; regulations change on a continuing basis
    For the most current regulations, refer to Yukon Workers' Compensation Health and Safety Board
    Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    Container has a carrying handle and hanging apparatus
    With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Yukon, Level 1, 16 Unit Container, Unitized

    Regulation first aid kits meet regulations required by the Government of Yukon; regulations change on a continuing basis
    For the most current regulations, refer to Yukon Workers' Compensation Health and Safety Board
    Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    Container has a carrying handle and hanging apparatus
    With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)

Newfoundland & Labrador, #3, 24 Unit container, Unitized

    Persuant to the regulations under the Newfoundland and Labrador Occupational Health & Safety Act, as amended
    No. 3 kit for workplaces with 15-199 workers (at any one time)
    For the most current regulations, refer to Occupational Health and Safety Department
    Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    Container has a carrying handle and hanging apparatus   
    With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included: First Aid Station sign and Report All Accidents sign
Additional items may be required where there are more than 15 workers or where required by an officer: stretcher, 3 blankets, 3 splints

Newfoundland & Labrador, #2, 16 Unit container, Unitized

    Persuant to the regulations under the Newfoundland and Labrador Occupational Health & Safety Act, as amended
    No. 2 kit for workplaces with 2-14 workers (at any one time)
    For the most current regulations, refer to Occupational Health and Safety Department
    Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    Container has a carrying handle and hanging apparatus   
    With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included: First Aid Station sign and Report All Accidents sign
Additional items may be required where there are more than 15 workers or where required by an officer: stretcher, 3 blankets, 3 splints

Newfoundland & Labrador, #1, 10 Unit container, Unitized

    Persuant to the regulations under the Newfoundland and Labrador Occupational Health & Safety Act, as amended
    No. 1 kit for workplaces with 1 worker (at any one time)
    For the most current regulations, refer to Occupational Health and Safety Department
    Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
    Container has a carrying handle and hanging apparatus   
    With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included: First Aid Station sign and Report All Accidents sign
Additional items may be required where there are more than 15 workers or where required by an officer: stretcher, 3 blankets, 3 splints

Prince Edward Island, No. 3, 24 Unit Container, Unitized

No. 3 kit for workplaces with 20 or more workers (at any one time)
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Prince Edward Island's Workers’ Compensation Board
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included: First Aid Station sign, spinal backboard

Prince Edward Island, No. 2, 16 Unit Container, Unitized

No. 2 kit for workplaces with 2-19 workers (at any one time)
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Prince Edward Island's Workers’ Compensation Board
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included: First Aid Station sign, spinal backboard

Prince Edward Island, No. 1, 10 Unit Container, Unitized

No. 1 kit for workplaces with 1 worker (at any one time)
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Prince Edward Island's Workers’ Compensation Board
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Item required but not included: First Aid Station sign

"Level 3" British Columbia Regulation First Aid Kit, #2 Container, Unitized

For Level 3 workplaces in the province of British columbia
Please note: The contents of this kit are identical to the Level 2 kit. Level 3 requires 2 or more kits.
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Workers' Compensation Board of BC
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included:
CPR pocket mask, 3 blankets, portable oxygen therapy unit, manually operated self-inflating bag-valve-mask, oropharyngeal (oral) airway kit

"Level 2" British Columbia Regulation First Aid Kit, #2 Container, Unitized

For Level 2 workplaces in the province of British columbia
Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
For the most current regulations, refer to Workers' Compensation Board of BC
Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit
With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
Items required but not included:
CPR pocket mask, 3 blankets, portable oxygen therapy unit, manually operated self-inflating bag-valve-mask, oropharyngeal (oral) airway kit

Littmann® Classic III™ 3M™

The 3M™ Littmann® Classic III™ Stethoscope offers high acoustic sensitivity for exceptional performance when doing general physical assessments. It features dual tunable diaphragms and an updated design that is easier to clean and maintain. 22 different models to choose from with a wide variety of tubing colours and chestpiece finishes.

Benefits
      •  Two-sided chestpiece with tunable diaphragms on both the adult and pediatric sides.
      •  Single-piece tunable diaphragm is easy to attach, and easier to clean because its surface is smooth without crevices.
      •  Pediatric side converts to a traditional open bell by replacing the single-piece diaphragm with a non-chill rim.
      •  Next-generation tubing provides longer life due to improved resistance to skin oils and alcohol; less likely to pick up stains.
      •  Small tunable diaphragm is useful for pediatric, small, or thin patients; around bandages; and for carotid assessment.
      •  Stainless steel chestpiece is precision-machined into an aesthetically pleasing, less angular shape. The stem features open side indicator.
      •  Snap-tight eartips have a soft, smooth surface providing a comfortable acoustic seal and comfortable fit
      •  Five-year warranty

ENGRAVING:
Personalize your stethoscope by engraving the tubing currently FREE at an introductory price of only $0.99 .

Tubing: A maximum of 24 characters can be engraved along the straight section of tubing below the point of bifurcation with the binaurals. Choose between engraving on the outer "front" aspect of the tube or a more discrete, private engraving on the inner "rear" aspect.

Please note that a personalized stethoscope cannot be returned or exchanged.
Prior to engraving, your purchase must be paid in full. COD and cheque orders cannot be engraved.
The First Aid Zone strives to ship all in-stock stethoscope orders within 24-48 hours after receiving an order. Engraving may slightly delay shipment. Please contact us or add a comment with your order if you are concerned with a delivery deadline.

Availability: Several of the options below have been discontinued by Littmann Canada. Seven of these options are available in limited quantities, the number remaining in stock is indicated in the bracket following the description. While we attempt to keep this list current, it is advised to call to confirm & reserve your selection of these limited models.

Saskatchewan Regulation First Aid Kit (40+ Workers)
    * For workplaces with 1-9 workers (at any one time)
    * Items required but not included in all kits in distant and isolated areas (more than 30 minutes to a medical facility or where normal mode of transport is aircraft): blankets, stretcher, splints. For high hazard work situations and workplaces requiring Class A or Class B attendants, consult www.labour.gov.sk.ca for additional requirements
    * Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
    * For the most current regulations, refer to Saskatchewan's Occupational Health & Safety Department
    * Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    * With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
OPTIONS:
    * Bulk packed
    * Unitized packaging also available. Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit (shown in picture)
    * Plastic or Metal container

Content List
Refer to Product Description tab (below)

PLEASE SELECT STYLE: . . .

Saskatchewan Regulation First Aid Kit (10-40 Workers)
    * For workplaces with 1-9 workers (at any one time)
    * Items required but not included in all kits in distant and isolated areas (more than 30 minutes to a medical facility or where normal mode of transport is aircraft): blankets, stretcher, splints. For high hazard work situations and workplaces requiring Class A or Class B attendants, consult www.labour.gov.sk.ca for additional requirements
    * Regulation first aid kits meet regulations required by each jurisdiction; regulations change on a continuing basis
    * For the most current regulations, refer to Saskatchewan's Occupational Health & Safety Department
    * Requirements vary and are dependent on a number of factors including: maximum number of employees at the work site (or per shift), location of the place of employment/industry, type of industry and potential hazards, proximity or travel time to a medical facility
    * With standard bilingual "First Aid Kit" image; also available with custom image (minimum quantities required)
OPTIONS:
    * Bulk packed
    * Unitized packaging also available. Unit boxes provide quick identification of first aid kit contents and maintain a neater, more attractive looking kit (shown in picture)
    * Plastic or Metal container

Content List
Refer to Product Description tab (below)

PLEASE SELECT STYLE: . . .